Updated November 1, 2026 · Reviewed for accuracy by a licensed Uniform plumber before publication
Signs it may be time
- More than one leak in a year in different places
- Rusty or discolored water, especially from galvanized pipe
- Falling pressure throughout the house
- Known problem material: polybutylene, or very old galvanized steel
- A slab leak in an older copper system
Pipe materials in Southwest Florida homes
| Material | Typical era | Notes |
|---|---|---|
| Galvanized steel | Older homes, mostly pre-1970s | Corrodes from the inside, reducing flow and causing leaks |
| Copper | Common for decades | Durable, but can develop pinhole leaks and wear under slabs |
| Polybutylene (gray plastic) | Roughly late 1970s to mid-1990s | History of failures; many insurers ask about it |
| CPVC | 1980s onward | Common in Florida; can become brittle with age |
| PEX | Common in recent decades | Flexible, fewer fittings; often the choice for repipes |
How a repipe works
Evaluation
We confirm the material, check pressure and leak history and map the routing.
Written estimate and permit
Scope, material, access plan and permit included.
New lines run
New pipe is routed through attic and walls, usually abandoning lines under the slab.
Switch over and test
Fixtures are reconnected and the system is pressure-tested and inspected.
Patch and restoration
Access holes are patched; finish painting and tile are usually another trade. We tell you up front.
What affects a repipe quote
- House size, number of bathrooms and fixtures
- One or two stories, attic access
- Material chosen
- How many walls and ceilings need access
- Permit and inspection
- Who handles drywall patching and painting